Careers at GIS

CAREER OPPORTUNITIES

• Automation Technician/E&I Electrical Technician

  Essential Duties and Responsibilities:

  • Adhere to and enforce all applicable company, state, and federal safety and environmental regulations.
  • Assist in performing analysis on all projects by visiting the location
  • Undertake emergency troubleshooting on mechanical , electrical, and hydraulic equipment to determine problems associated with the machines
  • Assist in the maintenance and support regarding all projects , installations and repairs .
  • Upgrade hardware & software for improved process control
  • Prepare periodic reports on the concerning faulty machines , errors , and processes
  • Conduct investigations, recommend changes and upgrades to equipment
  • Work smoothly with team members
  • Assist in the specifications , installation , modification of the systems
  • Ensure the calibration of all machines and maintenance after calibration
  • Provide regular systems operation training on automated systems
  • Computer skills including Excel and Word
  • Demonstrate knowledge concerning general safety protocol and procedures regarding field operations
  • ABB & ROC experience
  • Must know how to read measurements
  • Must have an extensive automation background 
    
    

  Minimum Education/Experience:

  • 3-5 years minim in related field

   

  Jal, NM / Pecos, NM  /Plattenville, CO / Canton, OH/Odessa, TX/Kermit, TX

  

• Blaster Painters

  General Position Summary:

  Cleans & sprays surfaces of manufactured products with cleaning and protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Cleans grease and dirt from products
  • Removes rust from metal surfaces with blasting agents
  • Applies masking tape over parts and areas that are not to be coated.
  • Fills cavities and dents with putty to attain smooth surface.
  • Selects and mixes coating liquid to produce desired color.
  • Pours coating liquid into spray container and connects gun to air hose.
  • Turns sprayer valves and nozzle to regulate width and pressure of spray.
  • Pulls trigger and directs spray onto work surface to apply prime or finish coat.
  • Coats areas inaccessible to hand sprayer with brush or other means
  • Cleans spraying equipment and brushes with solvent.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
    
    

  Minimum Education/Experience:

  1 year experience required

  
  Updated Twic Card Required 
  
  
  

  Offshore (GOM)

  

• Blaster Painter Helper

  • Updated Twic Card Required
  • Entry level
    
    

  Offshore (GOM) & Baton Rouge, LA

  

• Blaster Painter Supervisor

  General Position Summary:

  Supervises and coordinates activities of workers engaged in blasting and painting structural parts, equipment, interiors and exteriors of ships or vessels, and buildings in shipyard facility.
  
  

  Minimum Education/Experience:

  • Minimum 1 year experience supervising of some sort

   

  Updated Twic Card
  
  
  
  

  Offshore (GOM)

  

• Carpenter

  General Position Summary: Constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, conforming to local building codes, by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated.

  • Selects specified type of lumber or other materials.
  • Prepares layout.
  • Marks cutting and assembly lines on materials.
  • Shapes materials to prescribed measurements.
  • Assembles cut and shaped materials and fastens them together with nails, dowel pins, or glue.
  • Verifies trueness of structure with plumb bob and carpenter's level.
  • Erects framework for structures and lays subflooring.
  • Builds stairs and lays out and installs partitions and cabinet work.
  • Covers subfloor with building paper to keep out moisture and lays hardwood, parquet, and wood-strip-block floors by nailing floors to subfloor or cementing them to mastic or asphalt base.

  • Applies shock-absorbing, sound-deadening, and decorative paneling to ceilings and walls.
  • Fits and installs prefabricated window frames, doors, doorframes, weather stripping, interior and exterior trim, and finish hardware, such as locks, letter drops, and kick plates.

  • Constructs forms and chutes for pouring concrete.
  • Erects scaffolding and ladders for assembling structures above ground level.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  
  

  Larose, LA

  

• CDL Driver

  Essential  Duties and Responsibilities:

  • Haul oilfield equipment
  • Long-distance driving
  • Communicating and coordinating with dispatchers
  • Obeying and following applicable traffic laws
  • Securing cargo and properly arranging and balancing it within the vehicle
  • Maintaining a detailed log of working hours in compliance with state and federal regulations
  • Ensuring any mechanical issues with the vehicle are corrected before driving

  • Must maintain regular, dependable attendance and a high level of performance
  • Follow written and verbal directions to complete assigned tasks on schedule
  • Read, write, and communicate in English & understand basic math
  • Learn from directions, observations, and mistakes and apply procedures using good judgment
  • Complete all applicable documentation, recordkeeping and daily inventory
  • Must be able to bend, stoop, lift up to 50 pounds alone, twist, climb. Must be able to talk and hear well enough to communicate with all team members, vendors, and customers 100% of the time
  • Participate in safety briefings, job briefings, and any other pass on information from team members, management or customers

  • Operate in a manner where SAFETY and ENVIRONMENT are of the highest importance
  • Perform structural inspections as required
  • Prepare equipment for product transfer
  • Start, stop, and operate engines/pumps within defined operating parameters
  • Perform all work in compliance with Company standards, procedures, and regulatory requirements
  • Ability to work outside majority of the time and withstand extreme weather conditions
  • Must maintain regular, dependable attendance and a high level of performance
  • Must be able to work with a team, take direction and follow work rules, as well as, take on additional job responsibilities as needed or assigned
  • Flexibility required; ability to work days, nights, weekends
    
    

  Minimum Education/Experience:

  • Must have a CDL license (CDL A Preferred)
  • Commercial driving: 3 years (Preferred)
  • High school diploma or equivalent

  
  
  

  Fourchon, LA

  

• Construction Superintendent

  General Position Summary: Directs activities of workers concerned with construction of platforms, pipelines or other construction projects by performing the following duties personally or through subordinate supervisors.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Studies specifications to plan procedures for construction on basis of starting and completion times and staffing requirements for each phase of construction.

  • Assembles members of organization (supervisory, clerical, engineering, and other workers) at start of project.

  • Orders procurement of tools and materials to be delivered at specified times to conform to work schedules.

  • Confers with and directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

  • Confers with supervisory personnel and labor representatives to resolve complaints and grievances within work force.

  • Confers with supervisory and engineering personnel and inspectors and suppliers of tools and materials to resolve construction problems and improve construction methods.

  • Inspects work in progress to ensure that workmanship conforms to specifications and the adherence to construction schedules.

  • Prepares or reviews reports on progress, materials used and costs, and adjusts work schedules as indicated by reports.

  • Directs workers concerned with major maintenance or reconditioning projects for existing installations.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  • Must have Twic Card
  • Minimum 5 years of experience supervising (5-25 employees)
  • Minimum 10 years of experience in construction
    
    

  Offshore (GOM)

  

• Crane Operator

  General Position Summary: Operates diesel, gasoline, or electric powered crane mounted on crawler treads or pedestal to lift and move material and objects by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Performs Pre-Use Inspections according to GIS Policy and governmental regulatory standards &/or recommended safe work practices.

  • Starts and operates crane by moving levers and pressing pedals that control motion of crawler treads.
  • Pushes and pulls levers and presses pedals in response to hand signals to rotate crane on chassis and raise and lower crane boom and load line.

  • Inspects equipment for defective parts and notifies supervisor of defects or malfunctions.
  • Lubricates motor and moving parts of crane.
  • Utilizes GIS Critical Lift Form prior to performing lifts that are required by GIS Policy.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
    
    

  Minimum Education/Experience:

  • Nonmechanical Seatrax Crane Certification
    
    

  Updated Twic Card Required
  
  

   

  GOM (Offshore) & Fourchon, LA

  

• E & I Instrument Technician

  General Position Summary: Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational and environmental testing of mechanical, structural, or electrical equipment, and translates test data for engineering personnel. The Instrument Technician must have a good working knowledge of electronic and pneumatic instrumentation systems, components and end devices. He must have good written and verbal communications skills, and must be technically competent and able to work alone with no supervision at times. He must have a full working knowledge of all GIS E&I Safety, Environmental and Administrative Policies.

  Essential Duties and Responsibilities include the following: (Other duties may be assigned)

  • Can demonstrate an understanding of company/ industry/occupation-specific safety standards and procedures i.e., GIS E&I Health, Safety and Environmental Policies, GIS E&I Electrical Safe Work Practices, NFPA 70 E, Lock-out/Tag-out procedures, all applicable OSHA regulations, etc.

  • Can demonstrate an understanding of the principles of basic electricity and electronics.
  • Can demonstrate an understanding of the requirements of industry codes, standards and recommended practices i.e., National Electric Code, API RP 500, API RP 505, API RP 14 F, API RP 14FZ, API RP 14C, etc.

  • Can demonstrate the ability to identify, select and operate electrical and electronic measuring and test and calibration equipment such as volt-ohm meters, ammeters, decade resistance boxes and continuity testers.

  • Can demonstrate the ability to read and interpret wiring diagrams, one-line diagrams, ladder logic diagrams, schematics, piping and instrument diagrams, pneumatic control schematics, blueprints and manuals.

  • Can demonstrate the ability to properly identify, select and operate electrician’s tools, such as screwdrivers, pliers, hacksaws, soldering guns, power tools, etc.

  • Can demonstrate the ability to troubleshoot, diagnose, repair or replace malfunctioning PLCs, electronic or pneumatic instruments and components.

  • Can demonstrate the ability to perform bench and field calibration of pneumatic and electronic instruments, transmitters, controllers and recorders.

   

  MINIMUM EDUCATION/EXPERIENCE:

  • NCCR and/or OSHA 10 Preferred
  • Minimum 1 year of experience bending tubing
    
    

  • Updated Twic Card
    
    
    Offshore (GOM)

  

• Electrical/E&I Foreman

  General Position Summary: Directs activities of workers concerned with pneumatic and electrical installation of buildings, or other construction projects by performing the following duties personally or through subordinate supervisors. The Foreman can be either working or non-working, depending on the size of the crew being supervised. The Foreman must possess good communications skills, both written and verbal. He must demonstrate leadership and mentoring ability. He must be knowledgeable in the proper use and operation of man lifts or JLG lifts.

  The Foreman must be well aware of all GIS E&I Health, Safety, Environmental and Administrative Policies.

  Essential Duties and Responsibilities include the following: (Other duties may be assigned)

  • Can demonstrate an understanding of company/ industry/occupation-specific safety standards and procedures i.e., GIE E&I Health, Safety and Environmental Policies, GIS E&I Electrical Safe Work Practices, NFPA 70 E, Lock-out/Tag-out procedures, all applicable OSHA regulations, etc.

  • Can demonstrate an understanding of the principles of basic electricity and electronics.
  • Can demonstrate an understanding of the requirements of industry codes, standards and recommended practices i.e., National Electric Code, API RP 500, API RP 505, API RP 14 F, API RP 14FZ, API RP 14C, etc.

  • Can demonstrate an understanding of State and local building code requirements.
  • Can demonstrate the ability to read and interpret wiring diagrams, one-line diagrams, ladder logic diagrams, schematics, piping and instrument diagrams, pneumatic control schematics, blueprints and manuals.

  • Can demonstrate the ability to identify, select and operate electrical measuring and test equipment such as ohmmeters, ammeters, meggers, Hi-Pot, and continuity testers.

  • Can demonstrate the ability to properly identify, select and operate electrician’s tools, such as screwdrivers, pliers, hacksaws, pipe threaders, conduit benders (mechanical and hydraulic), soldering guns, power tools, etc.

  • Can demonstrate the ability to plan layout of electrical wiring methods, conductor and insulation selection, equipment selection and fixtures consistent with specifications, local codes and area classifications.

  • Can demonstrate an understanding of the functionality of control and distribution apparatus such as switches, outlets, relays, starters, lighting and power distribution panels, etc.

  • Can demonstrate proper techniques used to measure, cut, bend, thread, assemble and install electrical conduits i.e., Rigid, EMT, Plasti-Bond, IMC, PVC, etc.

  • Can demonstrate the ability to properly size electrical conduits and electrical circuit conductors to be installed in the conduits.

  • Can demonstrate the ability to properly layout and install electrical raceways and cable trays.
  • Can demonstrate the ability to install, troubleshoot and maintain Motor Control Centers, Switchgear, batteries and battery chargers, emergency power supply systems, bus ducts, stress cones, junction boxes, etc.

  • Can demonstrate proper techniques used to connect wiring to circuit breakers, transformers, lighting fixtures, power equipment, etc.

  • Can demonstrate proper techniques used to connect power cables to equipment such as electric ranges, electric motors, motor starters, transformers and to install grounding conductors.

  • Can demonstrate knowledge of equipment grounding and bonding requirements.
  • Can demonstrate the ability to troubleshoot, diagnose, repair or replace malfunctioning apparatus, equipment and components such as transformers, circuit breakers, relays, switches, fuses, motors, generators, light fixtures, etc.

  • Can demonstrate an understanding of Programmable Logic Controllers.
  • Can demonstrate proficiency when working with equipment operating at all voltage levels i.e., High Voltage, Medium Voltage and Low Voltage.
  •  

  Minimum Education/Experience:

  • Minimum of 8 years’ experience
    
    
  • Osha Cert
  • Drivers License
  • Twic Card Required
    
    

  Baton Rouge and New Orleans, LA 

  

• Electrical/E&I Helper

  General Position Summary: E&I Helper’s primary role is to assist Electricians and Instrument Technicians in assembly and work performance, demolition, cleaning, removing debris, building and grounds maintenance, handling trash, maintenance and construction. He must work under the direct supervision of an experienced Electrician or Instrument Tech or Fitter.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Must have knowledge of all applicable company/client safety standards and procedures, housekeeping, fire protection and material handling procedures.

  • Can demonstrate the proper use of all Personal Protective Equipment (PPE).
  • Knowledge of basic electricity and/or basic electronic/pneumatic instrumentation a plus.
  • Can demonstrate the proper care and use of basic tools i.e., hand, electric power, and pneumatic.
  • Can demonstrate the ability to cut pipe, conduit, instrument tubing, metal and wood.
  • Can demonstrate knowledge of basic mathematics skills.
  • Can demonstrate the ability to read a tape measure.
  • Can demonstrate the ability to correctly identify materials and nomenclature.
  • Must be able to correctly determine sizes and types of bolts and nuts.

  
  

  Minimum Education/Experience:

  • Minimum 4 years’ experience

  
  

  • Twic Card Required
  • Osha Cert
  • Drivers License
    
    

  Geismar, LA

  

• Electrical Journeyman

  Job description

  General Position Summary: Responsible for installing, maintaining and repairing electrical wiring, equipment and fixtures. Ensures that work is in accordance with relevant codes; consistently completing work to meet customer specifications.

  
  Essential Duties and Responsibilies:

  • Assembles, installs, tests and maintains electrical and electronic wiring, equipment, appliances, apparatus and fixtures using hand tools and power tools.
  • Diagnoses malfunctioning systems, apparatus and components using test equipment and hand tools to locate the cause of a breakdown and correct the problem.
  • Connects wires to circuit breakers, transformers or other components.
  • Inspects electrical systems, equipment and components to identify hazards, defects and the need for adjustment or repair and to ensure compliance with codes.
  • Advises management on whether continued operation of equipment could be hazardous.
  • Tests electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using testing devices such as ohmmeters, voltmeters and oscilloscopes to ensure compatibility and safety of system.

  Minimum Education/Experience:

  • Minimum of 6 years’ experience

  
  

  • Twic Card
  • OSHA Cert
  • Driver License
    
    

  GEISMAR, LA

  

• Electrician

  General Position Summary: Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes.

  • Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring.

  • Measures, cuts, bends, threads, assembles, and installs electrical conduit.
  • Pulls wiring through conduit.
  • Splices wires by stripping insulation from terminal leads, twisting or soldering wires together, and applying tape or terminal caps.

  • Connects wiring to lighting fixtures and power equipment.
  • Installs control and distribution apparatus such as switches, relays, and circuit-breaker panels.
  • Connects power cables to equipment, such as electric range or motor, and installs grounding leads.
  • Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as ohmmeter, battery and buzzer, and oscilloscope.

  • Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement.

  • Repairs faulty equipment or systems.
  • Cuts and welds steel structural members.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  
  

  Offshore (GOM)

  

• Environmental Supervisor

  General Position Summary: Directs activities of workers concerned with construction of buildings, dams, highways, pipelines, or other construction projects by performing the following duties personally or through subordinate supervisors.

  Essential Duties and Responsibilities include the following: (Other duties may be assigned)

  • Studies specifications to plan procedures for construction on basis of starting and completion times and staffing requirements for each phase of construction.

  • Assembles members of organization (supervisory, clerical, engineering, and other workers) at start of project.

  • Orders procurement of tools and materials to be delivered at specified times to conform to work schedules.

  • Confers with and directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

  • Confers with supervisory personnel and labor representatives to resolve complaints and grievances within work force.

  • Confers with supervisory and engineering personnel and inspectors and suppliers of tools and materials to resolve construction problems and improve construction methods.

  • Inspects work in progress to ensure that workmanship conforms to specifications and the adherence to construction schedules.

  • Prepares or reviews reports on progress, materials used and costs, and adjusts work schedules as indicated by reports.
  • Directs workers concerned with major maintenance or reconditioning projects for existing installations.

  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor

   

  Twic card required 

   

  Offshore (GOM) & Fourchon, LA

  

• Environmental Technician

  Summary: Cleans interiors of boilers, storage tanks, and industrial processing tanks to remove emulsion and incrustations by performing the following duties.

  Essential Duties and Responsibilities include the following: (Other duties may be assigned)

  • Drains tank, connects hose to water or steam lines, and sprays walls, roof, and bottom of tank to flush residue such as oil, acid, grease, and sludge through tank openings.
  • Scrapes and scrubs walls to remove incrustations, scale, or deposits of coke or catalyst.
  • Sweeps up debris and shovels sludge into buckets or wheelbarrows or down chutes.
  • Removes chemical residues and other liquids from tank bottoms with squeegees or pump and suction hoses.
  • Dries tanks with portable air drying equipment.
  • Tests gas content of tanks.
  •  Adds specified chemicals to industrial tanks to maintain and replenish tank processing solutions.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
    
    

  Minimum Education/Experience:

  Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.

  Physical Demands:

  The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Prolonged sitting or standing for long periods of time.
  • Extensive use of a computer terminal
  • Frequent walking
  • Frequently will lift up to 20 pounds
  • Close vision, distance vision, color vision, depth perception, and the ability to adjust focus
  • Travel required
  • Must be willing to work flexible hours, including weekends and/or evenings as necessary (based on project demands)

  • Conducts walk-throughs of construction sites.
  • Normal office environment
  • Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting and/or moving of materials or equipment (over 50 pounds).

  • Requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, solvents, fumes and heavy equipment
  • Requires working in outdoor weather conditions
  • Requires constant standing, sitting, bending, crouching, walking, pulling, pushing, reaching, kneeling
  • Must be willing to work flexible hours, including weekends and/or evenings as necessary (based on project demands)
  • Requires frequently working in confined spaces.
  • Requires working at all heights
  • Requires climbing up and down ladders, scaffolds and other objects
  • Must be knowledgeable with hydro blasting
  • Must be able to wear a respirator
    
    

  Twic card required 

   

  Offshore (GOM) & Fourchon, LA

  

• Field Service Tech

  General Position Summary: Plans and coordinates activities concerned with installing equipment, investigating and  resolving customer reports of technical problems with equipment, and eliminating future operational or service difficulties by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Installs new or modified equipment at customer's facility to ensure full functionality according to specifications.

  • Reviews performance reports and documentation from customers and field representatives, and inspects malfunctioning or damaged product to determine nature and scope of problem.

  • Analyzes review and inspection findings to determine source of problem, and recommends repair, replacement, or other corrective action.

  • Coordinates problem resolution with engineering, customer service, and other personnel to expedite repairs.

  • Provides on-site technical assistance to help troubleshoot and repair equipment.
  • Maintains records of performance reports.
  • Analyzes reports of technical problems to determine trends affecting future design, production, service, and maintenance processes, and recommends modifications to eliminate future problems.

  • Develops service handbooks and bulletins based on field investigations, engineering changes, and overall knowledge of product.

  • Provides a communication link between the customer and the company to help ensure that effective service is provided to the customer.

  
  

  • Updated Twic Card
    
    
    

  Offshore (GOM)

  

• Fitter

  General Position Summary: Lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, and building and platform parts by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Selects equipment and plans layout, assembly, and welding.
  • Lays out, positions, aligns, and fits components together.
  • Bolts, clamps, and tack-welds parts to secure in position for welding.
  • Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment.
  • Assembles parts by bolting and riveting.
  • Repairs products by dismantling, straightening, reshaping, and reassembling parts.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  
  

  • Updated Twic Card Required for GOM
  • Must be able to pass a specific fit test
    
    

  Offshore (GOM)

  

• Gas Measurement Technician

  General Position Summary: A Gas Meter Technician is responsible for testing, calibrating, and performing minor repairs to gas meters, gas regulators, and associated parts and equipment.

   

  Kermit, TX

  

• General Laborer

  GENERAL POSITION SUMMARY:

  Laborers are responsible for assisting skilled craft/construction workers in performing their assigned duties. Laborers perform a large variety of duties involving physical labor.

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Cleans and/or prepares job sites to eliminate possible hazards, which may include digging, spreading and leveling gravel
  • Cleans tools, equipment, materials and work areas

  • Loads, unloads and identifies building/construction materials, machinery or tools

  • Distributes machinery, materials and/or tools to the appropriate locations, according to project plans or specifications

  • Obtains tools, supplies, equipment and water for craftsmen as requested

  • Spreads or pours concrete, asphalt, gravel or other materials

  • Performs a variety of non-machine tasks, such as removing forms from set concrete, filling expansion joints with asphalt, placing culvert sections in trenches, etc.

  • Maintains a clean jobsite; may include sweeping, shoveling, painting, trash and debris removal, etc.

  • Performs minor repairs on equipment and buildings as directed

  • Spends time on one job, or may be transferred from task to task as the project progresses
    
    

  MINIMUM EDUCATION/EXPERIENCE:

  • Entry level position

  • Prior experience in the construction industry is preferred

   

  Houma, LA

  

• Ground Insulator

  Summary: Covers, boilers, pipes, tanks and refrigeration units with insulation materials, such as fiberglass, cork, plastic and magnesia to reduce loss or absorption of heat, prevent moisture condensation and to deaden sound. 

  Essential Duties and Responsibilities:

  • Wires prefabricated fiberglass covering around steam and hot water piping using: trowel mastic or brushes cement on insulation to obtain a smooth finish and covers piping with cloth.  
  • Fits thermoblock and magnesia block insulation around insulating boilers, evaporators and turbines; wires insulation on machinery and staples wire netting over insulation using: trowel cement on wire netting to protect insulating material; wires cork on salt water, refrigeration and air conditioning piping and cement cloth over insulating material to obtain a smooth finish.  
  • Cuts sheets of insulation into sections; fits and cements sections around fittings; covers gas piping of refrigeration or air conditioning systems with molded plastic; fabrication detachable insulation for valves or similar fittings; wires detachable covers on valves or fittings; installs fiber glass or spun glass on ventilation systems to deaden sound and prevent vibration. 

   

   

   Baton Rouge, LA & Offshore (GOM)

  

• Helper

  General Position Summary: Assists Industrial Maintenance Repairer in repairing and maintaining machinery, equipment, physical structures, and plumbing and electrical systems of industrial establishment by performing the following duties.

  Essential Duties and Responsibilities include the following: (Other duties may be assigned)

  • Dismantles machines or equipment, replaces defective parts and motors, and adjusts feed mechanisms.
  • Cleans and lubricates machine parts such as shafts, pulleys, gears, and bearings.
  • Replaces or repairs machine belts.
  • Removes dust, dirt, grease, and waste material from machines.
  • Paints machines or equipment to prevent corrosion.
  • Bends and cuts conduit and wire, and drills holes in walls, floors, and ceilings for electrical connections.
  • Connects wire to motors, fixtures, and other electrical equipment, replaces switches and fuses, and splices wire and insulates wire with friction tape.

  • Bends, cuts, and threads pipe, cuts openings in walls, ceilings, and floors for pipes, and seals pipe joints with sealing compound.
  • Cuts out and joins parts for worktables, benches, shelves and other furnishings.
  • Patches or replaces plaster or plaster board and paints walls, ceilings, and trim of building.
  • Clears clogged drains, and replaces plumbing fixtures.
  • Operates welding machine to repair or join metal parts.
  • Cleans work area, tools, and equipment and performs other routine duties.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  

   

  Galliano, LA/Baton Rouge, LA/Offshore GOM 

  

• Instrument Fitter

  • Updated Twic Card Required
  • NCCR and/or OSHA 10 Preferred
  • Minimum 1 year of experience fitting tubing
    
    

  Offshore (GOM)

  

• Insulator Supervisor

  • Twic Card Required
  • Must have 5 plus years of experience in insulating
    
    

  Offshore (GOM)

  

• Mechanic

  General Position Summary: Repairs and overhauls automobiles, buses, trucks, and other automotive vehicles by performing the following duties.

  Essential Duties and Responsibilities include the following. Other duties may be assigned. Examines vehicle and discusses with customer or Automobile Repair Service Estimator, Automobile Tester, or Bus Inspector nature and extent of damage or malfunction.

  • Plans work procedure prior to task
  • Raises equipment, with hydraulic jack or hoist, to gain access to lower parts as well as keeping proper ergonomics while performing task

  • Disassembles equipment and inspects parts for wear and replaces as needed
  • Overhauls or replaces carburetors, blowers, generators, distributors, starters, and pumps
  • Rewires ignition system, lights, and instrument panel.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  
  

  Larose, LA 

  

• Mid-Level Civil / Structural Engineer

  GENERAL POSITION SUMMARY: The Civil/Structural Engineer II is responsible for applying design and civil/structural engineering skills to a variety of Oil, Gas and Chemical projects in a multi-disciplinary environment. This is a junior level position requiring basic project experience with most work performed under general supervision: calculations, review vendor data, prepare specifications, prepare bid tabulations, and review shop drawings. Assignments are designed to further develop the Engineer’s judgement and understanding of professional and ethical responsibilities.

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Provides support to the Civil/Structural team
  • Participates in and prepares for client project meetings
  • Participates in meetings with other disciplines
  • Engages in field assignments as required: i.e. surveying assistance, constructability field walk, inspect
    equipment or structures, and etc.
  • Attends project field walks to evaluate project conditions and requirements
  • Assists in preparation of full project estimates
  • Leads small projects and/or preforms role as responsible engineer
  • Monitors project scope, schedule, and budget and notifies lead of changes
  • Researches and applies building codes, regulatory industry code requirements as well as company policies and procedures to assigned task
    

   

  EDUCATION/EXPERIENCE:

  • BS or MS in Civil Engineering from an ABET accredited school required
  • Engineer in Training (EIT) preferred
  • Minimum 2 years of relevant engineering experience in civil/structural engineering projects for industrial clients such as refining, chemicals, etc
  • Working knowledge of industry codes and standards: IBC, ASCE, API, AISC, NFPA,PIP, ASTM, OSHA
  • General understanding of EPC work processes, various project phases and associated scope/deliverables
  • Proficient with MS Word and Excel software
  • Knowledge of civil/structural engineering principles, terminology and concepts
  • Ability to effectively communicate with peers, co-workers, clients, customer, and the general public

   

  Baton Rouge or Gonzales, LA
  
  

  

• Production Operator C

  General Position Summary: Operates and maintains stationary engines and mechanical equipment such as air  compressors, generators, motors, and turbines to production facilities by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Reads meters and gauges or automatic recording devices at specified intervals to verify operating conditions.
  • Records data such as temperature of equipment, hours of operation, fuel consumed, temperature or pressure, water levels, analysis of flue gases, voltage load and generator balance.

  • Adjusts manual controls or overrides automatic controls to bring equipment into recommended or prescribed operating ranges, switch to backup equipment or systems, or to shut down equipment.

  • Visually inspects equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.

  • Maintains equipment by tightening fittings, repacking bearings, replacing packing glands, gaskets, valves, recorders, and gauges, and cleaning or replacing burners or other components.

  • Oils and lubricates equipment.
  • Records operation and maintenance actions taken during shift in operator’s logbook.
  • Performs any other specific duties that the customer may desire in relations to job scope
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  Updated Twic Card Required 
  
  
  

  Offshore (GOM)

  

• Production Pumpers

  7 & 7 Night Shift

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Measure and record production volumes of oil, water, and gas
  • Note and report variances
  • Monitor equipment for proper operation and condition
  • Accurately records meter readings, pressures and production volumes for reports
  • Reports concerns, potential issues problems requiring additional help to supervisor
  • Perform minor maintenance and housekeeping
  • Ensure operation is performed in a safe and environmentally sound manner
  • Respond to any emergency or call out situations
  • Maintain and adhere to treatment schedules, well test schedules and preventative maintenance
  • Maintains all records required by any regulatory body.
  • Equipment repairs
  • Troubleshooting
  • Clean facility
  • Additional responsibilities added as experience is added
  •  

  QUALIFICATIONS:

  • Must be computer literate with basic MS Office experience
  • Be available for “call out” duty on a regular basis
  • Must have mechanical abilitiesAbility to perform tasks at a fast pace, while paying attention to detail
  • Maintains a broad view approach to their work
  • Must be task oriented
  • Ability to work with all types of people and situations
  • Flexible, dedicated, and positive attitude
  • Excellent communication and organizational skills
  • Must have mechanical abilities
    
    
  • Updated Twic card
    
    

  Midland, TX 

  

• Production Technician

  GENERAL POSITION SUMMARY:
  

  • - Assemble and fabricate mechanical components according to specifications
  • - Use hand tools and power tools to complete assembly tasks
  • - Operate a forklift to move materials and finished products within the warehouse
  • - Follow safety protocols and maintain a clean and organized work area
  • - Collaborate with team members to ensure efficient production processes

  
  EDUCATION/EXPERIENCE:
  

  • Previous experience in a production or manufacturing environment is preferred
  • Mechanical knowledge and aptitude for working with tools and equipmeny
  • Ability to read and interpret technical drawings and assembly instructions
  • Strong attention to detail and ability to follow instructions accurately
  • Excellent problem-solving skills and ability to troubleshoot issues as they arise
    

   

  SKILLS:

  • Mechanical knowledge and understanding of assembly processes
  • Ability to use hand tools and power tools effectively
  • Experience operating a forklift is a plus
  • - Familiarity with warehouse operations and inventory management
  • Strong attention to detail and ability to work with precision

  
  

  • Must know basic MS office
  • Updated Twic card
  • Minimum 10 years of experience
    
    

  Mentone, TX, Levelland, TX, Midland, TX & Andrews, TX

  

• Recruiter

  Essential Duties and Responsibilities include the following: (Other duties may be assigned) 

  • Confers with management and supervisors to identify personnel needs, job specifications,[Text Wrapping Break]job duties, qualifications, and skills.
  • Develops recruitment programs, budgets, and collateral to attract applicants and to fill[Text Wrapping Break]specific job openings. (Trade Shows, Advertisements, And Billboards)
  • Develops and maintains network of contacts to help identify and source qualified[Text Wrapping Break]candidates.
  • Initiates contact with possibly qualified candidates for specific job openings.
  • Reviews applications and interviews applicants to obtain work history, education, training,[Text Wrapping Break]job skills, and salary requirements, and to provide information about the organization and[Text Wrapping Break]position.
  • Screens and refers candidates for additional interviews with others in organization.
  • Writes and places job advertising in various media.
  • Develops and coordinates internal job posting program and writes job postings.
  • Coordinates participation in, sets up display, and works at job fairs.
  • Develops and maintains contacts with schools, alumni groups, and other public organizations to find and attract applicants.
  • Makes public presentations at schools, organizations, and job fairs regarding the organization and opportunities.
  • Works with external recruiters and employment agencies to identify and recruit candidates.
  • Utilizes Internet online recruiting sources to identify and recruit candidates.
  • Provides information on company facilities and job opportunities to potential applicants.
  • Performs reference and background checks on applicants.
  • Coordinates communications with applicants.
  • Files and maintains employment records for future references.
  • Understand personnel requirements of different Departments
  • Understand wage limitations within each GIS Department
  • Get potential employees to fill out applications within GIS’s System
  • Authorized to approve hires within Applicant Management
  • Work with local vocational tech schools to influence their curriculum
  • Studies project schedules and staffing tables to ascertain personnel requirements.

  
  
  

  Houma/Galliano, LA, Baton Rouge, LA & Midland/Odessa, TX

  

• Rigger

  General Position Summary: Assembles rigging to lift and move equipment or material in manufacturing plant, shipyard, or on construction project by performing the following duties.

  Essential Duties and Responsibilities include the following. Other duties may be assigned.

  • Selects cables, ropes, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved.
  • Attaches pulley and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms with bolts and clamps.

  • Attaches load with grappling devices such as loops, wires, ropes, and chains to crane hook.
  • Gives directions to Overhead Crane Operator or Hoisting Engineer engaged in hoisting and moving loads to ensure safety of workers and material handled.

  • Sets up, braces, and rigs hoisting equipment.
  • Splices rope and wire cables to make or repair slings and tackle.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
  • Must be able to lift heavy material and equipment

   

  • Updated TWIC card

   

  Corpus Christi, TX

  

• Rope Access Blaster Painter

  General Position Summary: Cleans & sprays surfaces of manufactured products with cleaning and protective or decorative material such as paint, enamel, glaze, gel-coat, or lacquer by performing the following duties. 

  Essential Duties and Responsibilities include the following. (Other duties may be assigned) 

  • Cleans grease and dirt from products 
  • Removes rust from metal surfaces with blasting agents 
  • Applies masking tape over parts and areas that are not to be coated. 
  • Fills cavities and dents with putty to attain smooth surface. 
  • Selects and mixes coating liquid to produce desired color. 
  • Pours coating liquid into spray container and connects gun to air hose. 
  • Turns sprayer valves and nozzle to regulate width and pressure of spray. 
  • Pulls trigger and directs spray onto work surface to apply prime or finish coat. 
  • Coats areas inaccessible to hand sprayer with brush or other means 
  • Cleans spraying equipment and brushes with solvent. 
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor. 
    
  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • Perform specific job functions as it relates to job position on the ropes.  

   

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must have experience with a trade on ropes
    
    

  Offshore (GOM)

  

• Rope Access Fitter

  General Position Summary: Lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, and building and platform parts by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Selects equipment and plans layout, assembly, and welding.
  • Lays out, positions, aligns, and fits components together.
  • Bolts, clamps, and tack-welds parts to secure in position for welding.
  • Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment.
  • Assembles parts by bolting and riveting.
  • Repairs products by dismantling, straightening, reshaping, and reassembling parts.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • Perform specific job functions as it relates to job position on the ropes.  

   

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must have experience with a trade on ropes

  
  
  
  

  Offshore (GOM)

  

• Rope Access Insulator

  General Position Summary: Covers, boilers, pipes, tanks and refrigeration units with insulation materials, such as fiberglass, cork, plastic and magnesia to reduce loss or absorption of heat, prevent moisture condensation and to deaden sound. 

  Essential Duties and Responsibilities include the following. Other duties may be assigned. 

  • Wires prefabricated fiberglass covering around steam and hot water piping using: trowel mastic or brushes cement on insulation to obtain a smooth finish and covers piping with cloth.  
  • Fits thermoblock and magnesia block insulation around insulating boilers, evaporators and turbines; wires insulation on machinery and staples wire netting over insulation using: trowel cement on wire netting to protect insulating material; wires cork on salt water, refrigeration and air conditioning piping and cement cloth over insulating material to obtain a smooth finish.  
  • Cuts sheets of insulation into sections; fits and cements sections around fittings; covers gas piping of refrigeration or air conditioning systems with molded plastic; fabrication detachable insulation for valves or similar fittings; wires detachable covers on valves or fittings; installs fiber glass or spun glass on ventilation systems to deaden sound and prevent vibration. 
  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • Perform specific job functions as it relates to job position on the ropes. 

  
  

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must have experience with a trade on ropes
    
    

  Offshore (GOM)

  

• Rope Access Scaffold Builder

  General Position Summary: Erects, Inspects, repair, dismantle, maintain and identify scaffolds for Offshore/Onshore Construction Services and/or other entities or customers that may need the use of a scaffold.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Construct, revise, and dismantle various types of scaffolding in accordance to OSHA 1910.28 as well as all applicable GIS Policies and Procedures, safe work practices and/or minimum requirements

  • Ensure fall protection methods are available, adequate and maintained on scaffold assemblies for personnel that may have the possibility for the use of an erected scaffold

  • Supply identification for scaffolds in accordance to GIS Policies and Procedures
  • Performs pre-tour inspections on scaffolds that will may be utilize on that tour
  • Assure color-coding is accurate and within the time limits according to GIS’s Scaffolding Policy
  • Perform any Rigging or other job-related function deem necessary by the Supervisor with theunderstanding of training and qualification required

  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • Perform specific job functions as it relates to job position on the ropes.

  
  

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must have experience with a trade on ropes
    
    

  Offshore (GOM)

  

• Rope Access Technician

  General Position Summary: Responsible for physically conducting rope access operations and/or safety evaluations of rope access operations. 

  Essential Duties and Responsibilities include the following. Other duties may be assigned. 

  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • May perform inspections and repairs. 
  • Perform specific job functions as it relates to job position on the ropes. i.e. blaster/painter, welder, fitter, rigger, etc. 
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor. 

  
  

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must have experience with a trade on ropes
    
    

  Offshore (GOM)

  

• Rope Access Welder

  General Position Summary: Lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, and building and platform parts by performing the following duties.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Selects equipment and plans layout, assembly, and welding.
  • Lays out, positions, aligns, and fits components together.
  • Bolts, clamps, and tack-welds parts to secure in position for welding.
  • Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment.
  • Assembles parts by bolting and riveting.
  • Repairs products by dismantling, straightening, reshaping, and reassembling parts.
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.
  • Work in hard to reach areas without the benefit of a scaffold or work platform. 
  • Perform specific job functions as it relates to job position on the ropes.

  
  

  • Updated Twic Card
  • Must have a Sprat and/or Irata Certification
  • Must be able to pass specific weld test
    
    

  Offshore (GOM)

  

• Roustabout Pusher

  Carlsbad, NM

  

• Scaffold Builder

  General Position Summary: Erects, Inspects, repair, dismantle, maintain and identify scaffolds for Offshore/Onshore Construction Services and/or other entities or customers that may need the use of a scaffold.

  Essential Duties and Responsibilities include the following. (Other duties may be assigned)

  • Construct, revise, and dismantle various types of scaffolding in accordance to OSHA 1910.28 as well as all applicable GIS Policies and Procedures, safe work practices and/or minimum requirements

  • Ensure fall protection methods are available, adequate and maintained on scaffold assemblies for personnel that may have the possibility for the use of an erected scaffold

  • Supply identification for scaffolds in accordance to GIS Policies and Procedures
  • Performs pre-tour inspections on scaffolds that will may be utilize on that tour
  • Assure color-coding is accurate and within the time limits according to GIS’s Scaffolding Policy
  • Perform any Rigging or other job-related function deem necessary by the Supervisor with the understanding of training and qualification required

  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor.

  
  

  • Updated Twic Card
  • Minimum 1 year of experience scaffold building
    
    

  Offshore (GOM)

  

• Senior Project Manager

  GENERAL POSITION SUMMARY: The Project Manager III maintains overall responsibility for project(s) assigned to include execution, budget, contractual compliance and client relations.

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Develops Project Execution Plans
  • Responsible for reporting on projects internally and externally
  • Leads internal and client project meetings
  • Communicates with discipline leads to ensure the project team understands project scopes, specifications, required deliverables and manpower requirements
  • Ensures project team are following GIS Engineering, LLC quality standards and procedures
  • Coordinates change management
  • Maximizes profitability for GIS Engineering, LLC
  • Manages relationships with clients and project team members to create an environment for project success
  • Ensures proper project controls are in place throughout a project to include project budget (manhour/cost) and project schedule
  • Leads the preparation of proposals, bid packages and presentations
  • Performs project risk assessments
  • Participates in business development activities
  • Leads development of proposals, bid packages and presentations
  • Ensures contract compliance
  • Coordinates contract negotiations
  • Independently manages multiple EP or EPC projects <$15 MM TIC (Total Installed Cost)
  • Independently manages an EP or EPC project $15 - $85 MM TIC (Total Installed Cost)
  • Independently manages an EP or EPC project >$85 MM TIC (Total Installed Cost)
  • Independently manages a program of projects having multiple project teams

  EDUCATION/EXPERIENCE:

  •  Bachelor of Science degree in engineering from an ABET accredited university required
  • Minimum 5 years of experience as a Project Manager II and minimum 15 years of industry relevant
  • experience
  • Proficient with Microsoft Office software – Word, Excel, PowerPoint
  • PE certification is preferred
  • PMP or other project management certification is preferred

   

  Plaquemines, LA

  

• Structural/Pipe Fitter

  GENERAL POSITION SUMMARY:

  A structural/pipe fitter can fabricate, position, align, and fit parts of structural and pipe metal products.  

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes. 

  • Measure dimensions of completed products or workpieces to verify conformance to specifications. 

  • Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. 

  • Align parts or workpieces to ensure proper assembly. 

  • Move parts into position, manually or with hoists or cranes. 

  • Lift materials or workpieces using cranes or other lifting equipment. 

  • Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. 

  • Operate welding equipment. 
  • Align parts or workpieces to ensure proper assembly. 

  • Study engineering drawings and blueprints to determine materials requirements and task sequences. 

  • Read work orders or other instructions to determine product specifications or materials requirements. 
  • Review blueprints or other instructions to determine operational methods or sequences. 

  • Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components. 

  • Operate grinding equipment. 
  • Operate cutting equipment. 

  • Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met. 

  • Inspect metal, plastic, or composite products. 

  • Lay out parts to prepare for assembly. 

  • Tack-weld fitted parts together. 

  • Operate welding equipment. 

  • Lift or move materials and finished products, using large cranes. 

  • Lift materials or workpieces using cranes or other lifting equipment. 

  • Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches. 

  • Smooth metal surfaces or edges. 
  • Operate grinding equipment. 

  • Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone. 

  • Draw guide lines or markings on materials or workpieces using patterns or other references. 

  • Set up face blocks, jigs, and fixtures. 

  • Mount attachments or tools onto production equipment. 

  • Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting. 

  • Mount materials or workpieces onto production equipment. 

  • Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications. 

  • Draw guide lines or markings on materials or workpieces using patterns or other references. 

  • Erect ladders and scaffolding to fit together large assemblies. 

  • Assemble temporary equipment or structures. 

  • Design and construct templates and fixtures, using hand tools. 

  • Design templates or patterns. 

  • Construct patterns, templates, or other work aids. 

  • Hammer, chip, and grind workpieces to cut, bend, and straighten metal. 

  • Shape metal workpieces with hammers or other small hand tools. 
  • Operate grinding equipment. 

  • Install boilers, containers, and other structures. 

  • Assemble electromechanical or hydraulic systems. 

  • Direct welders to build up low spots or short pieces with weld. 

  • Direct operational or production activities. 

  • Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers. 

  • Reshape metal workpieces to established specifications. 

  • Smooth workpiece edges and fix taps, tubes, and valves. 

  • Smooth metal surfaces or edges. 

  • Preheat workpieces to make them malleable, using hand torches or furnaces. 

  • Heat material or workpieces to prepare for or complete production. 

  • Heat-treat parts, using acetylene torches. 

  • Heat material or workpieces to prepare for or complete production. 

  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor. 

   

  Abbeville, LA

  

• Structural/Pipe Welder

  GENERAL POSITION SUMMARY:

  A structural/pipe welder can operate appropriate equipment to cut and join metals and other materials with a great deal of precision.  Will need to have steady hands and a great attention to detail and also knowledge of different kinds of metal and their properties is essential. 

  ESSENTIAL DUTIES AND RESPONSIBILITIES:

  • Read blueprints and drawings and take or read measurements to plan layout and procedures. 
  • Determine the appropriate welding equipment or method based on requirements. 
  • Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements). 
  • Operate angle grinders to prepare the parts that must be welded. 
  • Align components using calipers, rulers etc. and clamp pieces. 
  • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead). 
  • Repair machinery and other components by welding pieces and filling gaps. 
  • Test and inspect welded surfaces and structure to discover flaws. 
  • Maintain equipment in a condition that does not compromise safety. 
  • Immediately report all Incidents/Accidents, no matter how small, to their Supervisor. 
    
    

   

  Abbeville, LA